spam your inbox.
Linea Mini Service & Repair
✓Factory-authorized La Marzocco service center
Linea Mini, Micra & GS3 Service & Repair
Factory-authorized La Marzocco warranty and repair service for home machines, with pickup and drop-off. Genuine La Marzocco parts and factory procedures on every repair.
WarrantyFactory-authorized La Marzocco warranty work
PickupWe can pick up and return your machine
GenuineOriginal La Marzocco parts only
Warranty service
Under warranty? You are in the right place.
Bean and Brew Technologies is a factory-authorized La Marzocco service center. That means we are approved by La Marzocco to perform warranty repairs on the Linea Mini, Linea Micra and GS3.
Repairs by unauthorized shops, or with non-genuine parts, can put your warranty at risk. We use genuine La Marzocco parts and follow factory procedures on every job, so your coverage stays protected.
Out of warranty? We repair those too, with the same parts and the same care.
Starting a warranty repair
- Request service online or call (973) 283-5568, and tell us what the machine is doing.
- Have your details ready: the serial number (on the machine) and your proof of purchase.
- We confirm coverage with La Marzocco before any work begins.
- We schedule pickup ($50 each way within 30 miles), or drop it off at our shop at no charge.
- We repair and return it, tested and ready to brew.
Pickup & drop-off
We come and get it. And bring it back.
A Linea Mini weighs around 70 pounds. You should not have to wrestle it into your car. We pick it up, repair it in our shop and bring it home.
01Request service
Book online or by phone and describe the problem.
02We pick it up
We collect the machine from your home at a scheduled time.
03Repaired in our shop
Diagnosed and repaired with genuine La Marzocco parts.
04We bring it back
Returned to your home, tested and ready to brew.
Pickup and drop-off: $50 each way within 30 miles of our shop. Beyond 30 miles, add $2 per mile (see Service Rates). Prefer to bring it in? Drop it off and pick it up at our Riverdale, NJ shop for free.
What we fix
Common Linea Mini, Micra & GS3 repairs
If your machine is acting up, we have most likely seen it before. These are the problems we repair most often.
Not heatingNo heat, slow heat-up or the machine will not power on.
LeakingWater under the machine, at the group or around the steam wand.
Low pressureWeak extraction, pump noise or pressure that drops mid-shot.
Steam problemsWeak steam, a wet wand or a steam valve that drips.
Temperature swingsInconsistent shots or a boiler that will not hold temperature.
Descaling & maintenanceScale removal, gaskets, screens and a full check-up.
Pricing
Clear, published rates
Warranty repairs
Covered
Covered repairs are handled under your La Marzocco warranty. We confirm coverage before any work starts. Pickup and drop-off fees still apply.
Out-of-warranty repairs
$190 / hour
In-shop labor, plus parts. You get an estimate before any work begins. No diagnostic charge if you approve the repair ($125 only if you decline).
Pickup & drop-off
$50 each way
Within 30 miles of our shop. Beyond 30 miles, add $2 per mile. Drop-off and pick-up at our shop are free. See all service rates.
Is Bean and Brew Technologies authorized to do La Marzocco warranty work?
Yes. Bean and Brew Technologies is a factory-authorized La Marzocco service center and performs La Marzocco warranty repairs on the Linea Mini, Linea Micra and GS3.
Will having my machine serviced somewhere else affect my warranty?
Work by unauthorized shops and non-genuine parts can put your La Marzocco warranty at risk. As a factory-authorized service center, we use genuine La Marzocco parts and follow factory procedures, so your coverage stays protected.
How do I know if my machine is still under warranty?
Warranty coverage is set by La Marzocco. Send us your serial number and proof of purchase when you request service, and we will confirm your coverage with La Marzocco before any work begins.
Do you offer pickup and drop-off?
Yes. We pick up your Linea Mini, Linea Micra or GS3, repair it in our shop, and bring it back. Pickup and drop-off are $50 each way within 30 miles of our shop, plus $2 per mile beyond 30 miles. The pickup fee applies to warranty and out-of-warranty repairs alike. Prefer to bring it in yourself? Drop it off and pick it up at our Riverdale, NJ shop at no charge.
What does an out-of-warranty repair cost?
Out-of-warranty repairs are done in our shop at $190 per hour, plus parts. We diagnose the machine and contact you with a repair estimate before any work begins. If you approve the repair, there is no diagnostic charge. A $125 diagnostic fee applies only if you decline the recommended repair.
Do you service commercial La Marzocco machines too?
Yes. We service the full La Marzocco range, including the Linea Classic, Linea PB, KB90, GB5 and Strada. See our La Marzocco service page for commercial service.
Get your La Marzocco brewing again
Factory-authorized warranty and repair service from Bean and Brew Technologies, with pickup and drop-off.